Our F18 sails have been well known and successful in the scene for years. The sails have been developed over the years, the latest sail in the F18 range is the DS18 Decksweeper mainsail.
We produce the right sail for all known F18 platforms. Jib and spi are also available as smaller versions for light crews.
We have suitable sails for the following platforms:
Hobie Tiger, Hobie Wildcat, AHPC Capricorn, AHPC C2, Cirrus, Nacra Infusion, Falcon F18, Mattia F18, Exploder, Phantom F18, Bullet F18
The GF18 builds on the successful 6 and 7 F18 mainsail series. To improve the light wind characteristics we have made the upper part of the sail a bit fuller. At the same time, the twist has been slightly enlarged to maintain the good all-round characteristics.
The DS18 is based on the GF1 mainsail. In order to keep the maximum sail area, the outline of the sail was adapted. The leech is less rounded and the head of the sail is smaller. The special feature of the Decksweeper sails is the lower part. As the name suggests, the sail reaches up to the deck/trampoline. This makes it possible to build the sail much fuller in the lower area and to keep the pressure point low. The result is a very powerful sail which is also easy to sail.
The DS18 is our recommendation to win races.
This jib we have only recently re-released. At the beginning the original model was still rollable or with short battens in the leech and was refined over the years.
The current cut is characterized by the fine, round entry and the easily controllable leech. This combination makes the jib a perfect all-rounder.
The profile can also be influenced by the hardness of the battens.
Available in 4.15qm and 3,45qm. Also available as furling jib.
The BWT 2 is part of the successful FB Spi series. The profile of the Spi has been changed only slightly and it is a bit fuller. The biggest change is the luff which has become longer and longer over the years.
The current geometry gets the maximum out of the existing class rules and is a perfect compromise between luff-length and max. sail-area.
The Spi is available in single colour or multicoloured, on request it is also available in polyester.
Sailsize 21qm or 19qm
© 2019 Segelmacherei Egner | Landenberger OneDesign, Titisee-Neustadt – Germany